|
This is a partial listing of some of the most popular parts and supplies used in our compressor systems. Please contact us directly for any parts, fittings, hoses, etc. not listed. Prices are subject to change without notice.
|
(click to order) |
Description | Price
|
 OP90030 |
Personal Filter - use between a "questionable" fill station and your tanks to insure that you are getting nothing but the cleanest air. This filter housing can use the same high grade filter cartridges as our MCH6 compressors to remove oil, water, hydrocarbons, taste and carbon monoxide and has a standard yoke fitting on one end to hook to your tank and a yoke block on the other end to hook to the fill whip. |
$ 249.95 |
 MCH6-100 |
MCH6 - 100 hour Service Kit (contains valves, gaskets, 4th stage head and inlet filter) | $ 249.95 |
MCH6-500 |
MCH6 - 500 hour Service Kit (contains valves, gaskets, 1st and 4th stage heads and inlet filter) | $ 299.95 |
 CS455-.5L |
Compressor Fluid - Coltri 455 FDA approved synthetic breathing air compressor fluid, 1/2 liter | $ 12.95 |
 CS455-L |
Compressor Fluid - Coltri 455 FDA approved synthetic breathing air compressor fluid, liter | $ 19.95 |
 CS455-G |
Compressor Fluid - Coltri 455 FDA approved synthetic breathing air compressor fluid, gallon | $ 54.95 |
CS751-.5L |
Compressor Fluid - Coltri 751 synthetic compressor fluid, 1/2 liter | $ 12.95 |
CS751-L |
Compressor Fluid - Coltri 751 synthetic compressor fluid, liter | $ 19.95 |
CS751-G |
Compressor Fluid - Coltri 751 synthetic compressor fluid, gallon | $ 54.95 |
 SC000340T |
MCH6 Triplex filter cartridge (drier, CO scrubber, odor remover) | $ 54.95 |
 SC000340D |
MCH6 Duplex filter cartridge (drier, odor remover) | $ 47.95 |
 SC000340 |
MCH6 Intake filter cartridge | $ 20.26 |
 SC000370 |
MCH13/16/26/32 Intake filter cartridge | $ 29.95 |
MCH16-500 |
MCH13/16 - 500 hour Service Kit (contains 2nd/3rd inlet and exhaust valves, 2nd/3rd stage gaskets and O-rings, seats for manual condensate drains, intake filter) | $ 326.95 |
MCH16-1000 |
MCH13/16 - 1000 hour Service Kit (contains first stage valve plate and gaskets, 2nd/3rd inlet and exhaust valves, 2nd/3rd stage gaskets and O-rings, seats for manual condensate drains, intake filter, filter tower O-rings) | $ 760.95 |
 SC000640T |
MCH13/16/26/32 Triplex filter cartridge (drier, CO scrubber, odor remover) | $ 96.32 |
SC000640D |
MCH13/16/26/32 Duplex filter cartridge (drier, odor remover) | $ 73.95 |
SC000640X |
MCH13/16/26/32 Drier filter cartridge (Paintball or multi canister filter system) | $ 75.45 |
 SC000440X |
MCH13/16/26/32 Repackable filter can | $ 109.10 |
 SC000460J |
Standard 4' fill whip(1/4" JIC female both ends) | $ 56.25 |
SC000460P |
Standard 4' fill whip(1/4" NPT male both ends) | $ 56.25 |
 SEP |
11" moisture separator. Includes housing, stainless steel inlet and outlet boss and bronze filter. | $ 669.95 |
 Com |
24" housing containing BOTH a coalescer and a chemical filter cartridge. | $ 803.95 |
 CAN15 |
One 15" Canister filtration upgrade. Includes housing, stainless steel inlet and outlet boss and filter cartridge (13,000 cu ft) |
$ 699.95 |
CAN15(2) |
Two 15" Canister
filtration upgrade. Includes housings, stainless steel inlet and outlet
boss, stainless steel connector boss and filter cartridges (26,000 cu ft) |
$ 1299.95 |
Hyper15 |
One 15" Canister
Hyperfiltration upgrade. Feed this grade "E" air to give OCA. Includes
housing, stainless steel inlet and outlet boss, filter cartridge,
stainless steel check valve, isolator valve, flow restrictor and
priority valve. (8,000 cu ft) |
$ 999.95 |
 CAN35 |
One 35" Canister filtration upgrade. Includes housing, stainless steel inlet and outlet boss and filter cartridge (26,000 cu ft) |
$ 949.95 |
CAN35(2) |
Two 35" Canister
filtration upgrade. Includes housings, stainless steel inlet and outlet
boss, stainless steel connector boss and filter cartridges (65,000 cu ft) |
$ 1749.95 |
Hyper35 |
One 35" Canister
Hyperfiltration upgrade. Feed this grade "E" air to give OCA. Includes
housing, stainless steel inlet and outlet boss, filter cartridge,
stainless steel check valve, isolator valve, flow restrictor and
priority valve. (16,000 cu ft) |
$ 1249.95 |
 1310 |
Balanced economy "Priority Valve" preset to maintain a back pressure on the filter system. Max flow rate is 10 CFM | $ 69.95 |
 211 |
Balanced economy "Priority Valve" with two outlets. Back pressure is user adjustable. Max flow rate is 50 CFM | $ 84.95 |
 WT347 |
Stainless steel CGA347 wrench tight nut and nipple | $ 32.00 |
 HT347 |
Stainless steel SCBA hand tight nut and nipple | $ 45.00 |
 347-1 |
Stainless steel SCBA to 1/4" NPTF adapter | $ 35.00 |
 PB-QD |
Stainless steel Paintball Quick Disconnect | $ 29.00 |
 5PM |
Five port (1 on top, one each side, two bottom 1/4" NPTF) anodized aluminum manifold | $ 95.00 |
 6PM |
Six port (three on top, three bottom 1/4" NPTF, 1/2" NPTF on each end ) O2 cleaned brass manifold | $ 70.00 |
 7PM |
Seven port (1 on top, one each side, four bottom 1/4" NPTF) anodized aluminum manifold | $ 130.00 |
 LV1 |
Line Valve, 1/4" NPT female in, male out | $ 54.95 |
 LV3 |
Line Valve, 1/4" NPT female in and out with bleeder | $ 62.50 |
 MM |
Anodized "Moisture Eye" monitor with 10/20/30 indicator card (1/4" NPTF in and out) | $ 70.00 |
 VIC |
10/20/30 visual indicator card replacement | $ 10.00 |
 SC000450B |
Coltri Yoke style deluxe fill valve with bleeder with 1/4" JICM inlet, 3000 psi service | $ 99.95 |
 SC000460SP |
Coltri DIN style deluxe fill valve with bleeder with 1/4" JICM inlet, 4500 psi service | $ 99.95 |
 SVA-3010D |
Sherwood DIN style deluxe fill valve with bleeder with 1/4" NPTF inlet, 3200 psi service | $ 99.95 |
 SVA-3010 |
Sherwood Yoke style deluxe fill valve with bleeder with 1/4" NPTF inlet, 3200 psi service | $ 99.95 |